6ES7453-3AH00-0AE0 SIMATIC S7-400, FM 453

Product Code: 6ES7453-3AH00-0AE0

Availability: In Stock

Price: $1,194.64
  
 
Artikelnummer 6ES7453-3AH00-0AE0
SIMATIC S7-400, FM 453 FUNCTION MODULE FOR POSITIONING WITH SERVO AND STEPPER MOTORS (3 CHANNELS) INCL. CONFIG. PACKAGE ON CD
Supply voltage
Auxiliary voltage
● Rated value (DC) 24 V
● dynamic range 18.5 to 30.2 V
● static area 20.4 to 28.8 V
Input current
from load voltage1L+, max. 1 A; with 24 V position encoder; 1 A for 5 V position encoder
from load voltage 2L+ to 4L+, max. 2 A; Per channel
from backplane bus 5 V DC, max. 1.6 A; Rated current
Encoder supply
5 V encoder supply
● 5 V Yes
● Output current, max. 300 mA
● Cable length, max. 35 m; at max. 210 mA; 25 m at max. 300 mA
24 V encoder supply
● 24 V Yes
● Cable length, max. 100 m; at max. 300 mA
Power loss
Power loss, max. 8 W
Digital inputs
Number of digital inputs 6; for each channel/axis
Functions configurable
Input voltage
● Rated value, DC 24 V
● for signal "0" -3 to +5 V (max. 3 mA)
● for signal "1" 11 to 30 V (max. 7 mA)
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max. 15 µs; via input voltage range, 8 µs at 24 V DC
— at "1" to "0", max. 45 µs; via input voltage range
Digital outputs
Number of digital outputs 4; for each channel/axis
Functions configurable
Short-circuit protection Yes
Output voltage
● Rated value (DC) 24 V
● for signal "1", min. UP - 0,3 V
Output current
● for signal "1" rated value 0.5 A; at 40 °C; 0.1 A at 60 °C
● for signal "1" permissible range for 0 to 40 °C, min. 5 mA
● for signal "1" permissible range for 0 to 40 °C, max. 0.6 A
● for signal "1" permissible range for 40 to 60 °C, min. 5 mA
● for signal "1" permissible range for 40 to 60 °C, max. 0.12 A
● for signal "0" residual current, max. 2 mA
Switching frequency
● with resistive load, max. 100 Hz
● with inductive load, max. 0.25 Hz
Encoder
Connectable encoders
● Incremental encoder (symmetrical) Yes
● Absolute encoder (SSI) Yes
Encoder signals, incremental encoder (symmetrical)
● Input signal 5 V difference signal (phys. RS 422)
● Input frequency, max. 1 MHz; for 10 m cable length; 0.5 MHz for 35 m cable length
Encoder signals, absolute encoder (SSI)
● Input signal 5 V difference signal (phys. RS 422)
● Clock frequency, max. 1.25 Mbit/s at 10 cable length (2.5 Mbit/s available soon)
● Cable length, shielded, max. 250 m; At max. 156 kbit/s
Drive interface
Signal input I
● Type Drive interface step, signal input "READY 1"
● Function "Power section ready" where Ui < 1 V, Ii = 2mA
Signal output I
● Type 5 V (phys. RS 422)
● Function Clock pulse, direction, enable, current control
● Differential output voltage, min. 2 V; RL = 100 Ohm
● Differential output voltage for signal "0", max. 1.1 V; Io = 30 mA
● Differential output voltage, for signal "1", min. 3.7 V; Io = -30 mA
● Load resistance 55 Ω
● Pulse frequency 200 kHz; 500 kHz available soon
● Cable length, max. 35 m; 35 m with symm. transmission; 10 m with asymm. transmission
Signal output II
● Type Contact relay
● Function Drive disconnection for operation
● Load 1 A/50 V/30 VA DC
Signal output III
● Type Analog output
● Function Drive interface Servo: Setpoint output for drive
● Output voltage -10 to +10 V
● Output current -3 to +3 mA
● Cable length, max. 30 m
Galvanic isolation
Galvanic isolation digital inputs
● Galvanic isolation digital inputs Yes; Optocoupler
Galvanic isolation digital outputs
● Galvanic isolation digital outputs Yes; Optocoupler
Degree and class of protection
IP20 Yes
Ambient conditions
Operating temperature
● min. 0 °C
● max. 55 °C
Storage/transport temperature
● min. -40 °C
● max. 70 °C
Relative humidity
● Humidity class F No
Connection method
required front connector 1x 48-pin
Dimensions
Width 50 mm
Height 290 mm
Depth 210 mm
Weights
Weight, approx. 1 620 g
last modified: 31.07.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: