6ES7145-4FF00-0AB0 ET200PRO, EM 4AO-U HF

Product Code: 6ES7145-4FF00-0AB0

Availability: In Stock

Price: $164.40
  
 
Digital output module 4DO

-
SIMATIC DP, ELECTRONIC MODULES FOR ET200PRO 4 AO U HIGH FEATURE, +-10V; 0...10V; 1...5V, CHANNEL DIAGNOSTICS; INCLUSIVE BUS MODULE CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY
Supply voltage
Load voltage L+
Rated value (DC) 24 V
Reverse polarity protection Yes
Input current
from backplane bus 3.3 V DC, max. 10 mA
Address area
Address space per module
Address space per module, max. 8 byte
Analog outputs
Number of analog outputs 4
Voltage output, short-circuit protection Yes
Voltage output, short-circuit current, max. 50 mA
Cycle time (all channels) max. 3 ms
Output ranges, voltage
0 to 10 V Yes
1 to 5 V Yes
-10 to +10 V Yes
Connection of actuators
for voltage output two-wire connection Yes
for voltage output four-wire connection Yes
Load impedance (in rated range of output)
with voltage outputs, min. 1000 Ω
with voltage outputs, capacitive load, max. 1 µF
Destruction limits against externally applied voltages and currents
Voltages at the outputs towards MANA 16 V; Permanent
Cable length
Cable length, shielded, max. 30 m
Analog value creation
Integrations and conversion time/resolution per channel
Resolution with overrange (bit including sign), max. 15 bit; at -10 to +10 V; 14 bits at 1 to 5 V; 15 bits at 0 to 10 V
Conversion time (per channel) 0.7 ms
Settling time
for resistive load 0.1 ms
for capacitive load 6 ms
Errors/accuracies
Output ripple (based on output area, bandwidth 0 to 50 kHz), (+/-) 0.02 %
Linearity error (relative to output range), (+/-) 0.1 %
Temperature error (relative to output range), (+/-) 0.01 %/K
Repeat accuracy in steady state at 25 °C (relative to output area), (+/-) 0.05 %
Operational limit in overall temperature range
Voltage, relative to output area, (+/-) 0.2 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area, (+/-) 0.15 %
Interrupts/diagnostics/status information
Substitute values connectable Yes
Alarms
Diagnostic alarm Yes; Parameterizable
Hardware interrupt No
Diagnostic messages
Wire break No
Short circuit Yes; per channel, not in zero range
Diagnostics indication LED
Group error SF (red) Yes
Parameter
Output type/range 1
Diagnosis: short circuit Outputs; sensor supply to M
Group diagnostics 1
Behavior on CPU/Master STOP 1
Galvanic isolation
Galvanic isolation analog outputs
between the channels No
between the channels and the backplane bus Yes
Dimensions
Width 45 mm
Height 130 mm
Depth 35 mm
Weights
Weight, approx. 150 g
Status May 26, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: