6ES7145-6HD00-0AB0 ET200ECO PN, 4AO U/I 4XM12

6ES7145-6HD00-0AB0 ET200ECO PN, 4AO U/I 4XM12

Product Code: 6ES7145-6HD00-0AB0

Availability: In Stock

Price: $321.95
Qty:
Add to Wish List
Add to Compare
  
 
ET 200eco PN, 4AO U/I 8XM12

-
SIMATIC DP, ET 200ECO PN, 4 AO U/I; 4 X M12, DEGREE OF PROTECTION IP67
General information
Vendor identification (VendorID) 002AH
Device identifier (DeviceID) 0306H
Supply voltage
24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption, typ. 280 mA
Encoder supply
Number of outputs 4
24 V encoder supply
short-circuit protection Yes; Electronic at 1.4 A
Output current, max. 1 A
Power losses
Power loss, typ. 5.5 W
Analog outputs
Number of analog outputs 4
Voltage output, short-circuit protection Yes
Voltage output, short-circuit current, max. 30 mA
Current output, no-load voltage, max. 20 V
Output ranges, voltage
0 to 10 V Yes
1 to 5 V Yes
-10 to +10 V Yes
Output ranges, current
0 to 20 mA Yes
-20 to +20 mA Yes
4 to 20 mA Yes
Connection of actuators
for voltage output two-wire connection Yes
for current output two-wire connection Yes
Load impedance (in rated range of output)
with voltage outputs, min. 1 kΩ
with voltage outputs, capacitive load, max. 1 µF
with current outputs, max. 600 Ω
with current outputs, inductive load, max. 1 mH
Destruction limits against externally applied voltages and currents
Voltages at the outputs towards MANA 28.8 V permanent, 35 V for max. 500 ms
Cable length
Cable length, shielded, max. 30 m
Analog value creation
Analog value display SIMATIC S7 format
Measurement principle Resistor network
Integrations and conversion time/resolution per channel
Resolution (incl. overrange) 15 bits + sign
Conversion time (per channel) 1 ms
Settling time
for resistive load 2 ms
for capacitive load 1.8 ms
for inductive load 2 ms
Errors/accuracies
Output ripple (based on output area, bandwidth 0 to 50 kHz), (+/-) U: ±0.6 mVrms; I: ±0.4 nArms
Linearity error (relative to output range), (+/-) 0.02 %
Crosstalk between the outputs, min. 70 dB
Repeat accuracy in steady state at 25 °C (relative to output area), (+/-) 0.0080 %
Interfaces
Transmission procedure 100BASE-TX
Transmission rate, max. 100 Mbit/s
Supports protocol for PROFINET IO
Number of PROFINET interfaces 1
Autocrossing Yes
Automatic detection of transmission speed Yes
Integrated switch Yes
PROFINET IO Device
IRT with the option "high flexibility" supported Yes
Prioritized startup Yes
Protocols
Supports protocol for PROFINET IO Yes
PROFINET CBA No
Supports protocol for PROFIsafe No
Protocols (Ethernet)
SNMP Yes
DCP Yes
LLDP Yes
ping Yes
ARP Yes
Interrupts/diagnostics/status information
Status indicator Yes
Substitute values connectable Yes
Alarms
Diagnostic alarm Yes
Diagnostic messages
Diagnostic functions Yes
Diagnostic information readable Yes
Monitoring the supply voltage Yes; Green "ON" LED
Wire break Yes; Channel-by-channel with current output
Short circuit Yes; Channel-by-channel with voltage output
Group error Yes; Red/yellow "SF/MT" LED
Galvanic isolation
between the load voltages Yes
between load voltage and all other switching components No
between Ethernet and electronics Yes
Galvanic isolation analog outputs
between the channels No
Permissible potential difference
between M internally and the outputs 10 Vpp AC
Degree and class of protection
IP65 Yes
IP66 Yes
IP67 Yes
Connection method
M12 Yes
Dimensions
Width 60 mm
Height 175 mm
Depth 49 mm
Weights
Weight (without packaging) 930 g
Status May 26, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue