6ES7132-0BL01-0XB0 ET200B, EL-BLOCK, 32DO, DC 24V, 0.5A

6ES7132-0BL01-0XB0 ET200B, EL-BLOCK, 32DO, DC 24V, 0.5A

Product Code: 6ES7132-0BL01-0XB0

Availability: In Stock

Price: $464.43
Qty:
Add to Wish List
Add to Compare
  
 
Artikelnummer 6ES7132-0BL01-0XB0
SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=235MM, 32DO, 24V DC, 0.5A
Supply voltage
24 V DC Yes; L1+, L2+, L3+, L4+, L5+; value at t < 0.5 s: 35 V
permissible range, lower limit (DC) 18.5 V
permissible range, upper limit (DC) 30.2 V
Input current
Current consumption, max. 75 mA; From L5+; logic
I²t 0.05 A²·s; with starting current inrush
Power loss
Power loss, typ. 7.9 W
Hardware configuration
Rack
● required terminal block TB2/DC, TB2-4/DC, TB4/DC, TB4-4/DC
Digital outputs
Number of digital outputs 32
Short-circuit protection Yes; Electronic
Limitation of inductive shutdown voltage to typ. (L1+ to L4+) -55 V
Controlling a digital input Yes
Switching capacity of the outputs
● Lamp load, max. 5 W
Output voltage
● Rated value (DC) 24 V
● for signal "0", max. 2 V; idling
● for signal "1", min. UE -3 V
Output current
● for signal "1" permissible range for 0 to 60 °C, min. 0.5 A; in groups of 8
● for signal "0" residual current, max. 1 mA
Output delay with resistive load
● "0" to "1", max. 20 ms
● "1" to "0", max. 0.5 ms
Switching frequency
● with resistive load, max. 100 Hz
● with inductive load, max. 0.5 Hz
● on lamp load, max. 8 Hz
Total current of the outputs (per group)
all mounting positions
— up to 60 °C, max. 2 A
Cable length
● Cable length unshielded, max. 100 m
Interfaces
PROFIBUS DP
● Transmission rate, max. 12 Mbit/s
● SYNC capability Yes
Communication functions
Bus protocol/transmission protocol PROFIBUS DP
Interrupts/diagnostics/status information
Diagnostics indication LED
● Bus fault BF (red) Yes
● Run mode RUN (green) Yes
● Status indicator digital output (green) Yes
Galvanic isolation
between electronic block and PROFIBUS DP Yes
Galvanic isolation digital outputs
● Galvanic isolation digital outputs Yes
● between the channels, in groups of 8
Degree and class of protection
IP20 Yes
Ambient conditions
Operating temperature
● horizontal installation, min. 0 °C
● horizontal installation, max. 60 °C; 40°C for other mountings
Air pressure
● permissible range, min. 795 hPa
● permissible range, max. 1 080 hPa
Relative humidity
● Operation, min. 15 %
● Operation, max. 95 %; RH class 2 in accordance with IEC 1131-2
Vibrations
● Operation, tested according to IEC 60068-2-6 Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Shock test
● tested according to IEC 60068-2-27 Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Connection method
Inputs/outputs Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection
Dimensions
Width 235 mm; EB and TB
Height 130 mm; EB and TB
Depth 60 mm; EB and TB
Weights
Weight, approx. 800 g; EB and TB
last modified: 31.07.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue