6GK7243-2AX01-0XA0 CP 243-2 (AS-I V2.11)

Product Code: 6GK7243-2AX01-0XA0

Availability: In Stock

Price: $188.38
Communications processor CP 243-2
SIMATIC NET, CP 243-2 COMMUNICATIONS PROCESSOR FOR CONNECTION OF A SIMATIC S7-22X TO AN ASI-INTERFACE WITH MASTER PROFILE M0E/M1E ACC. EXTENDED ASI-SPECIFICATION V2.11
 
General technical data:
Product designation AS-Interface Master
Product type designation CP 243-2
Protection class IP IP20
Design of the electrical connection / of the AS-interface Screw-type connection
Type of voltage supply via backplane bus
Operating condition / separate power supply 24 V No
Consumed current  
  • from profile conductors of the AS-interface
  
  • at 30 V / maximum
mA100
  • from backplane bus / maximum
mA220
Active power lossW3.7
Insulation voltage / Rated valueV500
Product function / suitable for AS-i Power24V No
Product property / redundancy capability No
Product function / web-based management No
Product function / Diagnostics via email No
Product function / Galvanic isolation Yes
  • as status display by LED
 PWR, APF, CER, AUP, CM, SF
Type of configuration / of the AS-interface Set pushbutton on device, command interface
 
Communication:
   
Version / of the AS-interface specification V 2.11
AS-interface master profile / is supported M3 (in acc. with AS-interface specification V 2.1)
Type of data transmission S7-200 backplane bus
Number of units / per CPU / maximum 2
Number of interfaces  
  • as AS-interface
 1
  • acc. to RS 485
 0
  • acc. to Industrial Ethernet
 0
  • acc. to PROFINET
 0
  • acc. to wireless
 0
  • acc. to USB
 0
  • other
 2
Product component / optical interface No
Protocol / is supported  
  • ASIsafe (Safety at work) protocol
 No
  • PROFIsafe protocol
 No
  • PROFIBUS protocol
 No
  • PROFINET IO protocol
 No
  • PROFINET CBA protocol
 No
  • TCP/IP
 No
  • SNMP
 No
Standard for wireless communication / IEEE 802.11 No
 
Ein- und Ausgänge:
   
Number of inputs / for AS Interface / maximum 248
Number of outputs / for AS Interface / maximum 186
Number of AS-i slaves / per AS-Interface / maximum 62
Bus cycle time / of the AS-interface  
  • for 31 slaves
ms5
  • for 62 slaves
ms10
Access to digital I/O data via process diagram/peripheral addresses and data record transfer
Access to analog I/O data via data record transfer
 
Mechanical design:
   
Widthmm71
Heightmm80
Depthmm62
Mounting type snap-on fastening on 35 mm standard mounting rail or screw fastening using an additional push-in lug
Module format S7-200 modular system
 
Ambient conditions:
   
Ambient temperature  
  • if installed on horizontal mounting rail / during operation
°C055
  • if installed on vertical mounting rail / during operation
°C045
  • during transport
°C-40+70
  • during storage
°C-40+70
Relative humidity / at 25 °C / during operation / maximum%95
Installation altitude / at height above sea level / maximumm2,000
 
Safety:
   
Suitability for use / safety-related function No
Explosion protection marking / for intrinsic safety of related equipment  
  • EEX ia
 No
  • EEX ib
 No
Explosion protection category for gas none
Explosion protection category for dust none
 
Certificates/approvals:
   
General Product Approval EMC Shipping Approval
EAC
C-TICK
GL / Germanischer Lloyd
PRS / Polski Rejestr Statkow
   
 
Further information:
Information- and Downloadcenter (Catalogs, Brochures,…)
Industry Mall (Online ordering system)
Cax online generator:
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, ...)
 
SIMATIC NET, CP 243-2 communications processor for connection of a SIMATIC S7-22X TO AN ASI-INTERFACE with master profile M0E/M1E ACC. extended ASI-SPECIFICATION V2.11
 
 
last change:
Oct 20, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: